31) Slave pallet
A pallet used in an automated rack system.
31 - 45 of 59 results
A pallet used in an automated rack system.
The distance between supports in a storage rack.
As a storage device, a vertical carousel provides for closed loop automatically controlled rotation of the basic storage unit, which in this case may be a shelf that can be subdivided into multiple bin locations. However, a shelf or a given vertical position need not be divided in order to handle large items such as a bolt of fabric or a roll of carpet. Because storage is vertical, such systems are popular when conserving floor space. Although automatic insertion and extraction of individual items or loads is possible, it is not as common as it is with horizontal carousel applications. See also Horizontal Carousels and/or AS/RS .
A standardized, pre-fabricated mezzanine structure built in "packaged"/"off the shelf" sizes, loading capacities and spans. Usually limited to lighter PSF (pounds per square inch) capacities and rapid delivery and rapid installation are benefits of the modular mezzanine.
A shelving unit designed to accommodate two different depths of shelves. Larger shelves are placed at the bottom and the unit is stepped back with smaller shelves on top. This step back forms a ledge across the face of the shelf. The shelving may be either open or closed type. In some instances, a ledge unit can be added to a regular shelving unit.
An access route to storage areas such as rack bays, slots for pallets, bins or containers.
Products such as placards, holders and nameplates that permanently or temporarily identify containers, racks, and pallets.
A Vertical Lift Module, or VLM is a storage system that consists of two parallel columns each of which is divided into fixed shelf locations that can hold a single storage module such as a tray or tote. The shelving locations are single deep. A tray or tote is inserted, extracted and transported between storage levels and picking locations via an elevator-like device with an automatic shuttle that travels up and down within the space between the storage columns. See also Carousels and/or AS/RS .
Rack Manufacturers Institute, Inc. The Rack Manufacturers Institute, Inc. is an independent incorporated trade association affiliated with the Material Handling Industry. The membership of RMI is made up of companies which produce the preponderance of industrial storage racks. Rack Manufacturers Institute 8720 Red Oak Blvd., Suite 201 Charlotte, NC 28217 Phone: (704) 676-1190 Fax: (704) 676-1199 Jeff Woroniecki, Managing Director
An application in which the area of wire decking support in confined to the surface area on the top of the front and rear beams fo the rack.
The component of rack decking which increases the capacity rating and rigidity of the assembly. Examples are: channels, tubes, rods, etc.
Technology that allows for a identification tag to be programmed and revised while the tag is still on the container, rack or pallet.
The label placard acts as a label holding device that allows the user to label and relabel containers, racks and pallets.
The label holder acts as a label holding device that allows the user to label and relabel containers, racks and pallets.
Placard system made of magnetic material and used on metal racks and other metal surfaces.