16 - 30 of 59 results
Industrial trucks equipped with a telescoping fork arrangement that permits the stacking of loads double deep. For storage depths greater than two, there is at least one example in Europe where the fork unit mechanically disengages from the mast allowing it to run into the rack on narrow rails under its own power which is derived from the truck via an umbilical cord. Applications like this can be considered a very special case of a drive-in type storage rack.
A racking system that is used where a greater storage density is required. It accommodates two pallet loads stacked back-to-back and requires special fork trucks called reach trucks.
A standardized, pre-fabricated mezzanine structure built in "packaged"/"off the shelf" sizes, loading capacities and spans. Usually limited to lighter PSF (pounds per square inch) capacities and rapid delivery and rapid installation are benefits of the modular mezzanine.
This type of rack utilizes upright frames, rails, and ties to allow a vehicle to enter a storage rack structure from one side only and pick up or deliver pallets on continuous rails. Drive-in rack is used to address repetitive products and serves to take advantage of cubic space available for storage, when such unit loads do not lend themselves to block stacking.
Utilizing wheels in the rack structure, this rack system allows palletized goods and materials to be stored by being pushed up a gently graded ramp. Stored materials are allowed to flow down the ramp to the aisle. This rack configuration allows for deep storage a each rack level.
A complete independent storage rack system which is the basic structural system of a building. A storage or warehouse facility in which storage rack functions as the structural support for the roof.
May be considered back-to-back selective rack. Inclined conveyor wheel sections are installed in the rack enabling back-loaded pallets are allowed to flow by gravity to the front or pick face. Pallet flow rack is useful for the movement of fast-moving items and serves to increase density of storage and throughput.
A single or multi-level structural storage system that is utilized to support high stacking of single items or palletized loads.
A rack, utilizing "arms" cantilevered from columns, used where there is a need for a full clear shelf that can be loaded from the front without obstruction from rack support uprights.
Self contained steel rack units made up of bases and/or decks and posts. Portable rack may be welded or collapsible units either having a knockdown feature which can be a space saver when units are not in use.
Steel storage rack made from hot rolled steel shapes, generally conforming to the requirements of AISC, such as angle, beams or tubing.
Steel storage racks arranged in either single or back-to-back (double) rows. Each of the rows offers a bay or number of bays in the down aisle direction. Pallets are generally positioned side-by-side in the down-aisle direction at each level of the bay. The advantage to this configuration of rack is that all pallets are accessible from the facing aisle.
In 1998, the members of the Rack Manufacturers Institute (RMI) voluntarily chose to cause conformance to RMI 97 and any successor documents(s) to be a condition of membership in the Association. In 1999, the members of RMI agreed to a certification process administered through a panel of independent Registered Professional Engineers. Certification requires the submitter to demonstrate a working knowledge of RMI 97 including delivering evidence of various physical tests needed to compute frame and beam load tables. Upon satisfactory completion of the Certification Process, the submitter is awarded a license to apply a unique registered R-Mark to designs. The R-Mark is only applied by a Licensed Professional Engineer along side of his/her PE seal. The process is open to all rack manufacturers. RMI encourages specifiers and users of Industrial Steel Storage Rack to consider the value of R-Mark certification when applying racking solutions.
A single or multi-level structural storage system that is utilized to support high stacking of single items or palletized loads.
The Rack Manufacturers Institute, Inc. is an independent incorporated trade association affiliated with the Material Handling Industry. The membership of RMI is made up of companies which produce the preponderance of industrial storage racks.