1) Lift tables
A scissors lift device used to raise, lower, stack, convey and/or transfer material between two or more elevations and not limited to landing.
1 - 4 of 4 results
A scissors lift device used to raise, lower, stack, convey and/or transfer material between two or more elevations and not limited to landing.
Palletizers are special machines capable of building a complete unit load on a pallet. Although the most common application is for cases, some palletizers can also handle sacks and bags. A less common palletizer application would be for special products such as sheet stock. There are two general methods employed for automatically building a full pallet. One makes use of a fixed position or overhead gantry robot with end effectors suited to the individual loads, such as vacuum lifts or a gripper. The other method employs more complex mechanisms for forming pallet layers off line, one at a time, and then shifting or transferring each successive layer onto the pallet as it is lowered via a lift/lower table.
An attachment to a fork truck, lift table or below-the-hook on a hoist that enables that piece of equipment to turn over drums for filling and emptying.
The maximum vertical distance through which the load hook can travel. The total allowable hook movement between its upper limit of travel and its lower limit of travel. The term "Lift" or "Lifts" may also refer to lift tables, scissor lifts and personnel lifts. Lift tables are ergonomic devices utilized to raise, lower or tilt work loads such as pallets and containers. Lift tables are a scissors lift device used to raise, lower, stack, convey and/or transfer material between two or more elevations and not limited to landings. Such movement enables the worker to access the load at an acceptable level so as to not exert undue physical strain while working with the item(s). A scissors lift is a raising/lowering device that is supported or stabilized by one or more pantograph leg sections. Likewise, personnel lifts are used to raise and lower humans to appropriate working heights so that they may work at a safe reaching level and will have benefit of increased movement not afforded by a conventional ladder.