16) Step beam
A beam that provides two horizontal surfaces on which the rack decking can be placed. Usually the top surface supports the deck and the lower surface supports the reinforcing members.
16 - 19 of 19 results
A beam that provides two horizontal surfaces on which the rack decking can be placed. Usually the top surface supports the deck and the lower surface supports the reinforcing members.
An access route to storage areas such as rack bays, slots for pallets, bins or containers.
The per square inch weight of the pallet load does not vary from one point to another on the pallet. Indicates that the load on a pallet is evenly distributed. Any static load which is evenly distributed over the entire surface of the rack deck. A load, as on a shelf, or pair of load beams, supported by all, or nearly all of the shelf or beam supporting surfaces
A storage surface located above the floor level and usually contained in shelving system or rack system. The formed steel sheet which attaches horizontally to the posts and supports the load. Shelves are available in many sizes and a number of capacities. Shelves should be specified based on the customer's requirements and uniform load capacity that the shelf must support. Steel gauge, shelf formation and reinforcing varies from manufacturer to manufacturer and thus determines shelf capacity.