1) Automated dispenser
A series of vertical product dispensers which kick individual units of products out the bottom onto a conveyor.
1 - 15 of 19 results
A series of vertical product dispensers which kick individual units of products out the bottom onto a conveyor.
A conveyor consisting of an endless belt, one or more chains, to which are attached projecting arms, or shelves, for handling packages or objects in a vertical or inclined path.
Plastic material is placed in an open mold, which is then closed. Pressure is applied as the mold halves come together (usually in a vertical configuration), forcing the plastic material to flow and fill the cavity.
A horizontal, inclined, or vertical device for moving or transporting bulk material, packages, or objects in a path predetermined by the design of the device, and having points of loading and discharge, fixed or selective.
May be considered a special case of shelving. The horizontal opening would typically be much narrower than that found in shelving and would have a vertical restraining member across the lower face of the bin opening.
An industrial truck that is weighed at the rear of the truck to prevent (counter) any forward tipping of the truck that could occur when lifting a load.
Also referred to as a "pillar-supported" jib crane. The jib is attached to a self-supporting floor mounted or floor to ceiling mounted mast. A column mounted jib crane may also be supported vertically by a structural column of the building structure itself.
A conveying system which consists of monorail track, track mounted electrification, individually powered vehicles, a supporting structure, a control system, lifts, switches and turntables.
Lifting devices, generally attached to a hoist or lift truck, which attach to a coil's OD via tongs or gripping mechanisms and enable the coil to be lifted without damage to the material. May also be configured to "turn" the coil over or move it in directions other than vertical.
The device at the bottom of a hoist's lifting medium (chain/wire rope) through which the medium is reeved and supports the hook and/or an attachment. May be stationary or rotating depending upon the requirements for the piece of lifting equipment.
A device, generally attached to the hook of a lifting device via a bail, which "grabs" a coil of materials when inserted into the ID of that coil. Derives its name from the physical appearance of the device which resembles the letter "C". May utilize counter- balancing weights to add stability and balance in the lifting motion.
Carousels are a technology used to store items for eventual picking or retrieval. There are two primary types of carousels and one related technology, all of which operate under some form of computer control. Since the late 1990s, carousels have been placed under the more general category of AS/RS. See also Horizontal Carousels , Vertical Carousels , Vertical Lift Modules and/or AS/RS .
A suspended machinery unit that is powered by pneumatically driven motors and is used to lift or lower a freely suspended (unguided) load. Generally uses chain or wire rope as its lifting medium.
A pneumatically driven machinery unit, utilizing chain as its lifting medium, and used for the lifting and lowering of a freely suspended (unguided)load. Often used in environments that require electric spark avoidance due to a potentially explosive atmosphere.
A pneumatically driven machinery unit, utilizing wire rope as its lifting medium, and used for the lifting and lowering of a freely suspended (unguided) load. Often used in environments that require electric spark avoidance due to a potentially explosive atmosphere.