Case Studies

346) End Trucks for Ship Unloading Equipment

American Crane designed, engineered, and fabricated traverse girders, saddles, and primary equalizer beams, giving the crane the capability to lift high capacity loads.

347) Large Span Single Girder Outdoor Gantry Crane

American Crane designed, engineered, tested, and installed a custom gantry crane with a 150 foot span. This type of crane can be used outdoors and its extensive span was the perfect ...

348) St. Lucie Nuclear Generating Station

American Crane designed, manufactured, installed, tested and provided training for the complete rebuild of these two (2) 150 ton single failure proof cask handling cranes.

349) Jib Crane for Hazardous Environment

American Crane designed, manufactured, tested and installed a 2 metric ton pedestal base mounted single girder jib crane specifically designed with slewing bearing for the oil and gas ...

350) Jib Crane for Hazardous Outdoor Corrosive Marine Environment

American Crane designed, manufactured, tested and installed a 15 ton pedestal base mounted jib crane with top running electrically driven hoist and trolley with slewing motion built ...

351) Boeing 787 Dreamliner Manufacturing Facility

American Crane provided the design, manufacture and installation of an 80 ton capacity custom underhung crane system with multiple bridges. These bridges can be interlocked to allow ...

352) Heavy Duty protection for Building Columns

A brand new facility owned by a company who, from experience with other warehouses, wanted to protect all of it’s 10”x10” building columns against forklift impact. As a prevention strategy, ...

353) First Line of Defense for your Uprights

A newly appointed warehouse manager inherited the responsibility of a facility with a lot of damage due to impact from forklift traffic. A rack survey report highlighted a damage pattern ...

354) Custom Work Platform with Circular Opening for Jet Engine Assembly

A leading manufacturer and service provider of aircraft engines is opening a new facility and implementing a new vertical assembly station to keep up with increase demand in engine ...

355) DEA Approved Wire Partition Drug Storage Cages

When the leading international logistics company required a pharmaceutical storage cage for their warehouse and distribution center, A2i Systems (a material handling distributor located ...

356) Robertson Produce Clears the Road

Robertson Produce has a refrigerated loading dock on the North side of their facility where the drive approach was not able to service 53” refrigerated trailers. The drive is both too ...

357) Climate Control at a Cold Storage Warehouse

D&G is a family-owned, nationwide LTL and truckload carrier offering temperature-controlled services. Located in Southeastern WI, D&G boasts a 99% on-time delivery record. Like all ...

358) Freight Carriers Find an affordable Loading Dock

With numerous facilities and many loading dock positions, freight carriers need an affordable option for dock levelers.

359) Easy Arm and G-Force Help Increase Efficiency in Power & Electric Facility Work

The workers were using a standard crane/hoist with pendent to maneuver the switches but the limited movement increased safety concerns with pinch-points due to multiple lift up/set ...

360) 300% Increase in Productivity With Help of Easy Arm®...

In one of the work cells, 50-80 lb.Torque Hubs® are assembled by picking up and moving the parts to an assembly table, then picking and flipping the part to place for a complete Torque ...